Conductive Adhesive Copper Tape Electric Barrier Signal Electrostatic EMI Shielding
Product description:
The purity of copper foil is higher than 99.95%, and its function is to eliminate electromagnetic(EMI) interference,
isolate electromagnetic waves on the human body injury, avoid unwanted voltage and current without affecting functionality.
In addition, electrostatic discharge after the ground has a good effect.
Paste strong, good electrical properties, according to customer requirements cut into a variety of specifications.
| Specifications: |
| Item |
Unit |
Specification |
Texting Standard |
Texting Method |
Others |
| Copper Thickness |
um |
25 |
25+3 |
|
|
| Basis Weight |
g/m2 |
160 |
160+10 |
|
|
| Width |
mm |
25 |
±0.2mm |
|
|
| Copper Foil |
% |
99.99 |
99.99 |
|
|
| Glue Thickness |
um |
25 |
25+3 |
ASTM-1000 |
|
| Composition |
----- |
|
|
|
|
| Total thickness |
um |
50 |
50+5 |
|
|
| Steel Adhesion |
kg/1" |
0.8 |
0.8 |
ASTM-1000 |
Initial adhesion tester |
| Initial Adhesion |
kg/1" |
1 |
1 |
J.DOW |
Electronic Stripping Tester |
| Rentention(cohesion) |
kg/h |
48 |
48 |
PSPC-7 |
Viscosity Tester |
| Weather Resistance |
℃ |
minus10-120℃ |
minus10-120℃ |
|
|
| Inventory Condition |
----- |
----- |
temperature:25℃ |
|
|
| RH:65% |
|
|
| Insulation Resistance |
----- |
0.01-0.06 |
0.01-0.06 |
|
Low dc resistance tester |
| Inventory Validity |
|
six month |
|
|
Feature:
1.excellent heat- exchanging performance
2.high softening temperature and high electric conductivity
3.chemical resistance
4.EMI RFI Shielding Barrier
Application
This item is widely used in electronics, home appliances, aviation and automobile manufacturing industry, copper foil tape is used in high-power high-frequency transformers.
Technical Data:
1. The tape has single-sided conductivity but we also have dual conductivity tape in our store so you can order the product according to your need.
2. One side is coated with a strong adhesive which is protected by paper backing on the roll.
3. Tape is resistant to oxidization and discoloration.
4. Suitable for indoor and outdoor use.
Packing Picture:
FAQ:
Q1. Can I have a sample order for lead glass?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A: Usually 5-7 working days.
Q3. Do you have any MOQ limit for led light order?
A: Low MOQ, 1pc is available.
Q4. How to proceed an order for lead glass?
A: Firstly let us know your requirements or size, thickenss and also quantity.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms.
Fourthly We arrange the production.
Product Tags:
|
|
2.5CM 25M Adhesive Backed Copper Tape Double Sided Signal Electrostatic Images
|
